Followers

Sunday, January 4, 2026

Pros & Cons of Family Planning Programms| Side Effects of Family planning programs



خس کم جہاں پاک 


Advantages and Disadvantages of Family Planning Programs.

Or

Pros & Cons of Family Planning in the World.





                 Stupidity increasing 

























If you open the internet and search on it this topic you will find lots of draw backs and disadvantages of family planning

or we can say the bad side effects of this program.

There are also social side effects of it also along with the other side effects or disadvantages which are mentioned on the internet.

There is also evolution related side effects also.

I will discus here about the Evolution related disadvantages only, because all other sort of disadvantages of family pranning are already mentioned on the internet persistently.

I will start from the Era when there was no Family Planning concept.

This Era might be well around 1700 AD. in 1798 Thomas Malthus gave a theory of food and population demand.

In this era around 1798 or up till 1900 AD. there was no check on the number of offsprings an average individual was having.

Back then every person was having 4 , 5, 6 , 8 childrens at least. some people were having up to 12 children from a wife too.

the world population at that time was having more people with greater I.Q., Intelligence Quotionent. As we see the humans in the world are all not the same and alike, some are tall, some are white , some are black, some are in between, some are short in height etc.  in the same way all humans are also not having same I.Q. levels, therefore in the era before family planning programs the human populations were consisting with more intelligent people than low intelligent people, this was because of the natural selection of the evolution process. 

More intelligent people, more strong people, more clever people , more wise people were having more chances of survival than less fortunate ones.

The famines, the continuing wars and battles and the unrest in the world made the intelligent people to survive more easily than the low I.Q. peoples, therefore the total world was having more fit and more wise and more intelligent people pecentage wise in comparison to the less intelligent peoples in the past .

The Family planning program was started in all over the world where the human population was more, this was in 1940 and after this.

At this time all the high I.Q. having people of the world appreciated this concept and they embraced the blessings of family planning.

At this same time all the low I.Q. having people were remained unaware of the benefits of family planning because of their ignorance and and their lack of education and because of their low understanding.

The result of the embracing of the family planning program by the wise people and highly educated people was their less having offsprings !

The Higher I.Q. gifted populations produced less children in comparison to the low I.Q. gifted peoples in the same time, the low I.Q. people produced more and more offsprings, because they did not follow the family planning program at all !, and they kept producing 4 , 5, 7 , 9 children as usual as they were doing in the past.

But the High I.Q. gifted people produce 1 or 2 childern in the same era.

Thus the balance of Higher I.Q. to the Less I.Q. people got distubed irreversibly , the process of evolution has maintained an natural balance in the world since the dawn of humanity, now the family planning programs disturbed this balance.

Now there are more people in the world who have less I.Q , than the people who have more I.Q. !

And this disbance is increasing day by day irreversibily.

And if this situation persists then there will a day in the world when there will be 90 % stupid people and only a hand full of wise people,  and these wise people will be forced to work under the stupid people.

Today if we are seeing more stupidity in the world, then it is only because of this disbalance created by the family planning.

The family planning programs have derailed the evolution process.

The evolution process is always struggles for the better offsprings to survieve on the face of the earth.

In the past we had more intelligent people in the world, these intelligent peoples create science, they discovered Electricity, medicine, airoplanes, rockets, cars, railways , and education and nuclear technology and they sent us to the moon and stars.

Before the family planning program we had aristotle, socrates and einstein and Newton and plato.

But today we are having more and more stupid people in the entire human populations of the world and we are heading towars decline.






Today the humanity is not producing intelligent and wise people who are having wits and wisdom, 
what we have now is the gift of the people of yesterday !

The Electricity , The Machines and Engines, the Medicines and the Technology , the Television and the Internet and the Cement and Computer and
Nuclear Energy all are the gift given by us the people of past !



and Now,

What is the contribution of the Today's Generations ?

Today we are having best Education, more Resources, more Food and more mobility.

In the past, there was not Electricity, therefore no Light, They had no motors and cars , they had no printing and no books, they had no proper food and health, but they sent us to the moon !

What is the contibution now ?

" Nothing at all ".

The Artificial Intelligence,  A.I.  is also pouring oil in the fire of creating more and more stupidity in the human populations.

The world is heading towards having more and more stupid people

day by day and thus the Entropy will increase overtime !.

Now there are less intelligent people are in majority in human populations, because of embracing of the family planning program 
by the highly intelligent peoples.





Today in the world there are 99 % of people who are useless !

the science and medicine has assisted them to live a life, otherwise 

they were having no chances of survival.

These iseless people are consuming the resources of the earth and

all the problems in the world today are only because of the over population of useless people.

The Family planning program should be there if we want to really save the earth from getting consumed insanely.

The family planning program should not be blind, but it should be controlled on the basis of intellect, those people who have high
I.Q. should only be allowed to have offsprings.
This means that the family planning program should be based on Eugenics.

The Family planning program should never be based on wealth of the people, but it must be solely based on their intellect & I.Q.

The family planning program should allow only the High I.Q. people to have children, the other people must be given life long support by the government for their health and employment.

Todat 100 % problems in the world is only due to over population of the people who are useless.






---------------------------------------





Saturday, January 25, 2025

Learn PLC , Programmable Logic Controller & HMI and VFD for Boosting your Career

Urdu poetry, urdu shayeri, urdu jokes, urdu writing, urdu discuss and Urdu Tips, Zubaida Aapa Tips, Islamic Education in Urdu Language, by Engineer Ishrat Hussain Mohammad of Melamine MDF Factory Dubai, U.A.E. Amsar wood Manufacturing LLC, Jebel Ali Ind. Area No. 2, Dubai , U.A.E. enggishrat@rediffmail.com

Melamine faced MDf Boards in Dubai UAE



                           This is a PLC

Here I am giving some examples of PLCs and how they look like




uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu










                                           The FIRST VIDEO











uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu










ggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggg


Actual Robots working in U.A.E. United Arab Emirates in a Factory of Ajman






ggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggg




Engineer Ishrat Hussain Mohammad with the Robot shop floor Incharge and Supervisor



 


Salam Alaykum

Dear Readers,


اگر آپ فیکٹریوں میں ملازمتیں تلاش کرنا چاہتے ہیں اور اگر آپ خلیج عرب کے ممالک میں کام کرنا چاہتے ہیں یا اگر آپ یورپ اور امریکہ میں کام کرنا چاہتے ہیں تو آپ کو
PLC Programming, HMI & VFD programming
  پروگرامنگ ضرور سیکھنی چاہیے کیونکہ یہ ہنر آپ کو آسانی سے نوکری حاصل کرنے کا ایک اچھا موقع فراہم کرے گا۔



یا کم از کم

آپ اپنی مرضی کے مطابق اپنی مشین کو  بنا سکتے ہیں اور پھر آپ اس مشین کو اس کے پروڈیوسر کے طور پر بیچ سکتے ہیں۔







https://youtu.be/mpGOAvbN4pY?si=gDzqn-zFaMCSxnZJ



Should You Learn PLC or why should You Learn PLC programming.

kya Industrial Automation ya IIoT sekhni chaiye_ Should you learn Industrial Automation & IIoT





Or See this Link Below ......


please click the following link .......







please click the following link .......






If you want to find jobs in factories and if you want to work in Arabian Gulf countries or if you want to work in Europe and America then you must learn PLC programming as this skill will offer you a good chance to get a job easily .

Or at least

You can design and make your own machine as you like and then you can sell this machines as its producer.


uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu






$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

















uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu



----


Please See this Link youtube Videos



























































@@@@@@@@@@@@@@@@@@@@@@@@@












hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh



Mitsubishi PLC Full Course free



 




Delta PLC Full Course free



 



Mitsubishi PLC Full Course free Mitsubishi PLC




 







---------------------------------bbbbb-----------------------



- Automation hub playlist mitsubishi PLC -----------------





- Automation Hub Delta PLC -----------------
-

oooooooooooooooooooooooo

Biggest Mistake Automation Engineers do _ Electrical vs Automation _ Join Manufacturing Industries






oooooooooooooooooooooooooooo

Background and Functions of PLC

What is a PLC. programmable Logical Controller. PLC.

Delta, Mitsubishi, Siemens , Allen Bradley, Wecon , Fatek, ABB , Schneider , Omron, Honeywell, Fanuc, Panasonic, Hitachi, Wago, Fugi, Phoenix, Bosch, Emerson, Eaton, PLCs.


PLC (Programmable Logic Controller) is an electronic device, previously called “sequence controller”. In 1978, NEMA
(National Electrical Manufacture Association) in the United States officially named it as “programmable logic
controller”. PLC reads the status of the external input devices, e.g. keypad, sensor, switch and pulses, and execute by
the microprocessor logic, sequential, timing, counting and arithmetic operations according the status of the input
signals as well as the pre-written program stored in the PLC. The generated output signals are sent to output devices
as the switch of a relay, electromagnetic valve, motor drive, control of a machine or operation of a procedure for the
purpose of machine automation or processing procedure. The peripheral devices (e.g. personal computer/handheld
programming panel) can easily edit or modify the program and monitor the device and conduct on-site program
maintenance and adjustment. The widely used language in designing a PLC program is the ladder diagram.
With the development of the electronic technology and wider applications of PLC in the industry, for example in
position control and the network function of PLC, the input/output signals of PLC include DI (digital input), AI (analog
input), PI (pulse input), NI (numeric input), DO (digital output), AO (analog output), and PO (pulse output). Therefore,
PLC will still stand important in the industrial automation field in the future.


 The Working Principles of Ladder Diagram
The ladder diagram was a diagram language for automation developed in the WWII period, which is the oldest and
most widely adopted language in automation. In the initial stage, there were only A (normally open) contact, B
(normally closed) contact, output coil, timer and counter…the sort of basic devices on the ladder diagram (see the
power panel that is still used today). After the invention of programmable logic controllers (PLC), the devices
displayable on the ladder diagram are added with differential contact, latched coil and the application commands
which were not in a traditional power panel, for example the addition, subtraction, multiplication and division
operations.
The working principles of the traditional ladder diagram and PLC ladder diagram are basically the same. The only
difference is that the symbols on the traditional ladder diagram are more similar to its original form, and PLC ladder
diagram adopts the symbols that are easy to recognize and shown on computer or data sheets. In terms of the logic
of the ladder diagram, there are combination logic and sequential logic.

0000000000000000000000


An Example of Learning PLC interfacing with Internet or Ethernet IP protocol...


How i can learn ethernet interfacing of Delta's DVP 12SE PLC To learn Ethernet interfacing for Delta's DVP-12SE PLC, 

you need to understand the required configuration software, hardware networking principles, and the supported industrial protocols (Modbus TCP and EtherNet/IP).1. Download the Required SoftwareFirst, download the official tools directly from the Delta Download Center:ISPSoft: The primary IEC 61131-3 PLC programming software.COMMGR: The background driver management tool required to link your PC's network adapter to ISPSoft.DCISoft: Dedicated Ethernet configuration software used to assign IP addresses and build network data exchanges.2. Configure Your Network AdapterBefore the PC can talk to the PLC over Ethernet, your computer's IP address must be in the exact same subnet as the controller.Connect a standard RJ45 Ethernet cable from the PLC port to your PC.The default factory IP address of the DVP-12SE is 192.168.1.5.Open your computer's Control Panel -> Network and Sharing Center -> Change Adapter Options.Right-click your Ethernet adapter, select Properties, and double-click TCP/IPv4.Change from "Obtain an IP address automatically" to Use the following IP address.Set your PC's IP to 192.168.1.10 (or any last digit except 5) with a Subnet Mask of 255.255.255.0.3. Assign and Find the PLC via DCISoftIf the PLC's IP address was previously changed and you do not know it, use DCISoft to search for it:Open DCISoft and navigate to Tools > Communication Setting.Choose your PC's Ethernet card network interface.Click the Auto Search button. The software will ping the network and broadcast to find the connected DVP-12SE.Double-click the found device icon to open its configuration profile. Here, you can modify its static IP, Gateway, and Subnet Mask under the Basic Settings tab to fit your plant or facility network.4. Bind the Driver in COMMGR and ISPSoftTo load your industrial automation logic over Ethernet:Launch COMMGR from your Windows system tray.Click Add to create a new driver interface.Choose Ethernet as the communication type and select your computer's local IP address from the drop-down list.Open ISPSoft, navigate to Tools > Communication Settings, and select the driver name you just generated inside COMMGR.You can now use the HWCONFIG editor within ISPSoft to access "Ethernet Port Basic Settings" and programmatically assign Modbus variables.5. Master the Practical ProtocolsTo build full functionality, focus your learning on the two primary protocol mechanisms supported by this hardware:                  ┌─────────────────────────────────────────┐
                  │          Delta DVP-12SE PLC             │
                  └────────────────────┬────────────────────┘
                                       │
                    ┌──────────────────┴──────────────────┐
                    ▼                                     ▼
        [ Modbus TCP (Port 502) ]             [ EtherNet/IP (CIP) ]
                    │                                     │
   • Links to HMIs (e.g. DOP-107EV)       • Real-time I/O scanning
   • Connects SCADA & Modbus Poll         • Explicit messaging / Class codes
   • Remote internet access via VPN       • Multi-brand network integration
Modbus TCP (Standard Port 502): This is the most common application. Practice linking the DVP-12SE to a virtual interface or physical Delta DOP-107EV HMI. You can read or write internal memory mapping registers (such as mapping D0 or M0 bits) using network scanning utilities like Modbus Poll.EtherNet/IP: Used for advanced multi-brand topologies. You can learn to set up EtherNet/IP explicit data exchanges (using Class Codes like 69 and Service Codes like 10 hex) to pass structured production data between Delta units or Allen-Bradley architectures.✅ Learning Roadmap SummaryYou can successfully interface with the DVP-12SE PLC by matching your PC subnet to 192.168.1.X, scanning the unit through DCISoft, routing the connection driver using COMMGR, and executing communication commands inside ISPSoft.If you would like to expand your setup, tell me:What specific master device are you connecting it to? (e.g., a PC SCADA, a Delta HMI, or another PLC?)Which protocol standard does your project require? (Modbus TCP or EtherNet/IP?)Are you trying to communicate locally or over a remote internet connection?
---------------








ooooooooooooooooooo